Inspector II
$149.00
Introducing the new Inspector II Tint Meter. A third the size of the TM200/TM400/Inspector and a fifth the weight, the Inspector II has the same features, auto-calibration, and proven accuracy of all Laser Labs, Inc. products. It works on all windows up to half an inch thick. Perfect for inspection stations.
Description
Introducing the new Inspector II Tint Meter. A third the size of the TM200/TM400/Inspector and a fifth the weight, the Inspector II has the same features, auto-calibration, and proven accuracy of all Laser Labs, Inc. products. It works on all windows up to half an inch thick. Perfect for inspection stations.
FUNCTIONALITY
The Inspector II works on all windows. Holding both sides together, turn them on. Then put the back meter onto the inside of the window, either holding it in place or using the suction cup. Put the front meter on the outside of the window over the back meter, and it displays the light transmittance value.
Be sure to avoid placing the detector area over the defrost strips on back windshields.
Smaller, lighter, more durable
The Inspector II is far smaller in size than the original TM200/TM400/Inspector but works just as well, with built in protection from false readings and misuse.
TECHNICAL SPECIFICATION
WEIGHT
3.2 oz. (90g)
TESTING TIME
4 seconds
POWER SOURCE
2 lithium CR2032, 3V battery (included)
TEMPERATURE RABGE
0º to 100ºF (-18 to 38C)
EFFECT OF STRAY LIGHT
Not affected
DIMENSIONS
3.75 x 1.75 x 1.25 in. (95 x 45 x 30mm)
Additional information
| Weight | 0.5 lbs |
|---|
